l it e - o n t e ch no l o g y co rp o rat io n property of lite-on only features * isolation voltage between input and output v iso : 5,000v rms january 2010 * 6pin dip zero-cross optoisolators triac driver ou tput * high repetitive peak off-state voltage v drm : min. 600v * high critical rate of rise of off-state voltage ( dv/dt : min. 1000v / m s ) * dual-in-line package : moc3063 * wide lead spacing package : moc3063m * surface mounting package : moc3063s * tape and reel packaging : MOC3063S-TA1 * safety approval ul / csa / fimko / vde* approved *required v ordering option * rohs compliance applications * ac motor drives * ac motor starters * e.m. contactors * lighting controls * solenoid/valve controls * solid state relays * static power switches * temperature controls part no. : moc3063 series page : 1 of 8 bns-od-c131/a4 http://www.tenand.com ??e?????e?t1??? shenzhen tenand technology co.,ltd http://www.tenand.com ??e?????e?t1??? shenzhen tenand technology co.,ltd
l it e - o n t e ch no l o g y co rp o rat io n property of lite-on only outline dimensions dual-in-line package : wide lead spacing package: *1. year date code. *2. 2-digit work week. *3. factory identification mark shall be marked. (z : taiwan, y : thailand, x : china-tj, w : china- cz) *4. model no.: moc3063 part no. : moc3063 series page : 2 of 8 bns-od-c131/a4
l it e - o n t e ch no l o g y co rp o rat io n property of lite-on only outline dimensions surface mounting package : *1. year date code. *2. 2-digit work week. *3. factory identification mark shall be marked. (z : taiwan, y : thailand, x : china-tj, w : china- cz) *4. model no.: moc3063 part no. : moc3063 series page : 3 of 8 bns-od-c131/a4
l it e - o n t e ch no l o g y co rp o rat io n property of lite-on only taping dimensions tape and reel package : MOC3063S-TA1 description symbol dimensions in mm ( inches ) tape wide w 16 0.3 ( .63 ) pitch of sprocket holes p 0 4 0.1 ( .15 ) distance of compartment f p 2 7.5 0.1 ( .295 ) 2 0.1 ( .079 ) distance of compartment to compartment p 1 12 0.1 ( .472 ) part no. : moc3063 series page : 4 of 8 bns-od-c131/a4
l it e - o n t e ch no l o g y co rp o rat io n property of lite-on only absolute maximum rating ( ta = 25 c ) parameter symbol rating unit forward current i f 50 ma reverse voltage v r 6 v input power dissipation p d 120 mw off-state output terminal voltage v drm 600 v peak repetitive surge current ( pw=100 m s, 120pps ) i tsm 1 a output collector power dissipation p c 150 mw total power dissipation p tot 250 mw *1 isolation voltage v iso 5,000 vrms ambient operating temperature range t a -40 ~ +100 c storage temperature range t stg -55 ~ +150 c *2 soldering temperature t l 260 c *1. ac for 1 minute, r.h. = 40 ~ 60% isolation voltage shall be measured using the follo wing method. (1) short between anode and cathode on the primary side and between collector, emitter on the secondary side. (2) the isolation voltage tester with zero-cross ci rcuit shall be used. (3) the waveform of applied voltage shall be a sine wave. *2. for 10 seconds part no. : moc3063 series page : 5 of 8 bns-od-c131/a4
l it e - o n t e ch no l o g y co rp o rat io n property of lite-on only electrical - optical characteristics ( ta = 25 c ) parameter symbol min. typ. max. unit conditions forward voltage v f 1.2 1.4 v i f =20ma input reverse current i r 0.05 10 m a v r =6v *1 peak blocking current, either direction i drm1 500 na v drm = 600v peak on-state voltage, either direction v tm 3.0 v i tm =100 ma peak output *2 critical rate of rise of off-state voltage dv/dt 1000 v/ m s *3 led trigger current, current required to latch out put, either direction moc3063 i ft 5 ma main terminal voltage = 3v coupled holding current, either direction i h 400 m a inhibit voltage v inh 5 20 volts i f =rated i ft , mt1-mt2 voltage above which device will not trigger. zero crossing leakage in inhibited state i drm2 500 m a i f = rated i ft , rated v drm , off state *1 test voltage must be applied within dv/dt rating . *2 this is static dv/dt. commutating dv/dt is a fun ction of the load-driving thyristor(s) only. *3 all devices are guaranteed to trigger at an i f value less than or equal to max i ft . therefore, recommended operating i f lies between max i ft 5ma for moc3063 and absolute max i f (50ma) part no. : moc3063 series page : 6 of 8 bns-od-c131/a4
l it e - o n t e ch no l o g y co rp o rat io n property of lite-on only characteristics curves fig.1 forward current vs. fig.2 on-state current vs. ambient temperature fig.4 forward current vs. forward 0 -40 60 c 40 c 20 c ambient temperature fig.6 holding current vs. temperature fig.5 on-state voltage vs. ambient fig.3 minimum trigger current vs. ambient temperature i , o n - s t a t e c u r r e n t ( a ) ambient temperature ta ( c) ambient temperature ta ( c) ambient temperature ( c) ambient temperature ta ( c) ambient temperature ta ( c) 0 20 40 60 80 100 60 0 0.4 1 2.0 0.01 20 40 60 80 100 20 1.0 100 20 0 10 oo o ambient temperature o o voltage 3.0 10 100 86 4 2 50 40 30 20 10 100 1 o 80 c o 100 c 0.05 0.10 t m v p = 6v r l = 100 2.6 2.2 1.4 1.8 40 80 60 o v p = 6v 0.8 1.2 1.6 o 80 60 40 o 0.1 120 -20 -40 -20 0 80 40 20 60 100 120 f o r w a r d c u r r e n t i f ( m a ) m i n i m u m t r i g g e r c u r r e n t i f t ( m a ) o n - s t a t e v o l t a g e v t m ( v ) f o r w a r d c u r r e n t i h ( m a ) f o r w a r d c u r r e n t i f ( m a ) forward voltage v f (v) i tm = 100ma part no. : moc3063 series page : 7 of 8 bns-od-c131/a4
l it e - o n t e ch no l o g y co rp o rat io n property of lite-on only characteristics curves recommended foot print patterns (mount pad) unit : mm part no. : moc3063 series page : 8 of 8 bns-od-c131/a4
|
